EBC A10+ Battery Capacity Tester Electronic Load Power Supply Tester Charge and Discharge Meter 0 30V10A

EBC A10+ Battery Capacity Tester Electronic Load Power Supply Tester Charge and Discharge Meter 0 30V10A
  • Продавецwww.chicagobearsvsbaltimoreravens.us
  • Список ценUS $103.39piece
  • Продажная ценаUS $103.39piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,2 (109)

Oписание продукта

coin operated systemgame board and other part-1game board and other part-2joystickbutton

 

 

 

 

product

20180115_10123520180115_10185920180115_10104320180115_101949

 

 

DESCRIPTION

 

Manual

PAGE-1

Specification

 

Input and output Voltage

AC110V or AC220V

Max current load

110V:1250W

220V:2200W 

Standby

Display shows:00:00

Accumulated time

Yes, add time if insert coins again

How it works

Insert coins/sense card-> Display shows remaining time and supply power to device-> it cuts off power after time runs out

Program coin

Please reference to page 3.

Time setting

Please reference to page 4.

Operating mode setting

Please reference to page 5.

Card reader setting

Please reference to page 6.

Installation

Please reference to page 2.

 

Description

1. Outlet: Plug in device Power cord (page 2-A)

2. Set Up Time: Set up time on time control board by 4 buttons (page 4)

3. Display: Shows code when SET UP TIME.
                  Shows remanding time when running time.

4. Program coins on Multi Coin acceptor (page 3)         5. Coin collector

6. Reset Counter: check total coin amount. (page 2-G)

    Reset: hold on button between A and B for 5 seconds.

7. Card reader display: shows indication for card

8. Lock                                           9. Free to Add pad lock

10. Card sense zone: put on user card on sense zone

11. Card balance check: push--> put user card on sense zone--> show balance

12. Power cord in (page 2-C)     

13. Device power cord goes through in to No. 1 (page 2-B)

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PAGE-2

Installation   

A. Plug device power cord through No.13 into No.1 

A1A2

B. Screw iron sheet on

B1B2

C. Power on: connect power cord to 110V or 220V

C1C2

D. Please follow specification to program coins and set up time

E. Power off. Place and fix the box.

F. Start using

G. No.6: reset counter- check total COIN income

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PAGE-3

Multi coin acceptor

Step 1

Code “H”: set up “15”

Code “P”: output signal quantity: inset a coin. 

                Usually, P1=01, P+number=P1 multiply rate
                Example: 2 dollar, 4 dollar: P1=01,P2=02

Code “F”: accuracy (1-30), “1” is the most accuracy.

Number: indicate rank of coin type (1-6).

 

1. Hold on button “ADD" and "MINUS" simultaneously for seconds."A" shows up.

2. Hold on button "SET" for seconds."E" shows up.

    Use button “ADD and MINUS to set up coin type between 1 and 6.

3. - Hold on button “SET” for seconds to switch to next code from H to F in cycle.
    - Please Use button “ADD” and MINUS to set up value.
    - Please hold on button “SET” for seconds to switch to next code
    - Please follow following table to set value for code.

First type

Second type

Third type

Forth type

Fifth type

Six type

code

value

code

value

code

value

code

value

code

value

code

value

H1

15

H2

15

H3

15

H4

15

H5

15

H6

15

P1

SET

P2

SET

P3

SET

P4

SET

P5

SET

P6

SET

F1

08

F2

08

F3

08

F4

08

F5

08

F6

08

E

Please power off and on after you see “E” AGAIN.

 

Note:
-  Usually, “F” is set up as 08, you can decrease value if you need more accuracy.

- If coin type is not up to 6, “E” shows after coin type reaches your setting.
   For example: If you set up coin type as 3, “E” shows up after F3. You can powe off and on after finish “F3”
- If you want to change value few, free to hold on button “SET” to skip others.

Step 2

1.       Hold on button "SET" for seconds, and "A1" shows up from display.

2.       Please insert coins of TYPE 1 into coin entry until "A1" shows up again.

3.       Please repeat No.1 and No.2 until all coin types are sampled.

4.       Please power off and on.

Tip: If you want to re-sample few types, free to hold on button “SET” to skip others.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PAGE-4

0004

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PAGE-5

OPERATING MODE SETTING

  • Mode Setting

Please follow table to set up operating function:

1.Please hold on button "S1" and "S2" simultaneously for 3 seconds to get into MODE SETTING.

2.Please use button "S1" and button "S2" to set up number for CODE

3.Please press button "S4" to switch to next code

Function

Code on Display

Description

A

B

Running Time

01

01

Time runs down without pressing button

Time Type

02

03

MINUTE: SECOND

04

HOUR: MINUTE

Memory

03

05

Yes: Remaining time keep running after power off and on

06

No: Standby power off and on

Back to standby

04

1-30

user has no action after push buttons or receive signals in setting time

Default: 01-03: Bold and base line. 04: not use the function.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PAGE-6

P61P62

1. For user:
                       1-1. Check balance:
                           Push B1
 sense user card  Display shows balance
                    1-2. Pay from balance: send signal after deduct cost from balance

2.For business: Change setting
    (1) If you have card writer, You can use software to set up.
         save setting on management card
sense managementfinish setting.
    (2) If you do not have card writer, Please follow TABLE 1 to set up manually.
         - Hold on B2 for seconds
Title shows uppress B1 or B2 to set
           Hold on B2 for seconds to switch to next title
         - Free to Hold on B2 for seconds to skip title

Title

Option

Title

Option

Title

Option

Output Pulse

1-50

Standby show

None

Welcome

Cost

Cost Unit

CENT

10 CNET

100CENT

Cost

1-100

Duration

30ms

50ms

100ms

NO NC

NO

NC

 

Table 1

3. Inspection card: press B2sense inspection cardshows total income
    press B2shows previous totalpress B2shows Serial number
   Clear card:
   Push B2
Sense card shows “Clear?”press B1 or B2 to cancel or confirm.

 

size

 

Money box inside

 

 

Note: 

  • If you need more membeship card and recharge machine, please contact us.
  • Please note current load of your machine need to be under 1500W.

 

power cord for choosing

3*0.75mm2

Please leave message on order page for plug. We will pick it up if you do not inform us on order page.

Voltage Checking

 

 

 

 

20160505_08554020160505_08560820160505_163103

 

PURCHASE NOTES

Warranty

- We accept return in 7 days after buyer receive the goods. Buyer pay for the fore and back shipping charge if it is not seller’s mistake. In the unlikely event that item can not work well, seller pay for the fore and back shipping charge for a new one or issue buyer refund.
- For “any type of BOX”, we DO NOT accept return. In the unlikely event that there is a problem, seller sends parts to buyer for replacing.
- 1 year warranty.
Shipping
POST
- Tracking number is provided after sending and available for tracking 3 days later. 
   please inform us if the tracking number is not trackable after 3 days.
- Tracking website: tracking website
- To United States, we send by e-pocket. For RUSSIA, please provide FULL NAME for sending. To Argentina, we don’t send goods.
 EXPRESS
- Usually, The local customs charges tax when goods arrive at local customs. Please double check if it is ok before choosing express.
  Every country has different RATE FOR TAX. Please check rule with your customs.
- Some countries we send by DHL, some countries, we send by FEDEX. If you are insisted in SPECIFIC EXPRESS WAY,please inform
us on order page. 
- To  RUSSIA, we only send by DHL or EMS, customer need to have ability to do clearance. 
 
Other information
We will declare low value for you. If you need us to declare real value, please inform us on order page.
Please note clear speciation on order page for items, like COLOR, SIZE, etc. or it may be picked up by random.
- If we need any information to confirm with you, we will send message on order page. Please pay attention on it before sending goods.
Feedback
- We appreciate if you leave the feedback after you test your goods.
-Please communicate with seller when you have questions instead of leaving feedback directly or open a dispute. We will provide suggestions in 24 hours after you send message to us.
-If you have any questions, please let us know. We will reply to you in 24 hours.