Attention :
If your duplicator LCD screen broken. Please follow the instruction to replace the screen.
The backlight can be removed easily to build for 3D printer or for video projector and DIY projector !
If you hope this screen work at 60hz, your pc need to support 2k 60hz,and pleas use 2.0 HDMI Cable,
and we need write 60Hz board for you, so please leave message to us.
Note for buyer:
1: in stock now !!!
2: 1 lcd Screen(romoved backlight)+ Driver Board + Flex Cable
3: Please contact us for full datasheet and technical support
4:Screen protector glass is already installed on the LCD screen!!!
Module Dimensions | 70.94(W)mm*128.26(H)mm*1.35(t)mm(Excluding I/F -FPC and electronic components) |
Active Area Dimensions | 68.04(W)mm*120.96(H)mm(5.46”) |
Pixel Pitch | 0.04725(W)mm*0.04725(H)mm(538ppi) |
Resolution | 1440*2560 |
Color Pixel Arrangement | RGB Vertical Stripe |
Display Mode | Transmissive Type,Normally Black Mode,In-Plane Switching Mode |
Number of Colors | 16,777,216 Colors |
Backlight | Light Emitting Diode(LED),14LEDs are 2 parallel,7 series connection Backlight current:20mA/LED(typ) |
Power Supply Voltage | AVDD=5.5+/-0.1V AVEE=-5.5+/-0.1 V |
Interface I/O Power supply Note(1) | VDDI=1.8=/-0.1V The same voltage as “H” level of a customer’s interface signal must be supplied to VVDI |
LCD Driver IC | (Source and Power IC: Renesas SP Driver Inc.) |
Interface | MIPI_DSI Video mode(4-Lan x2-port) |
Method of Inversion | Column Inversion |
Surface Treatment | HC-Polarizer(Hardness:3H) |