5.5 inch 2k LCD Module LCD Screen Display and HDMI MIPI Driver Board Replacement For Wanhao Duplicator 7 3D Printer VR Glass

5.5 inch 2k LCD Module LCD Screen Display and HDMI MIPI Driver Board Replacement For Wanhao Duplicator 7 3D Printer VR Glass
  • Продавецwww.chicagobearsvsbaltimoreravens.us
  • Список ценUS $41.42piece
  • Продажная ценаUS $41.42piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,8 (173)

Oписание продукта

5.5 inch  LCD screen display with HDMI top MIPI controller board for 3D printer Duplicator 7 LCD

 

Attention :

If your duplicator  LCD screen broken. Please follow the instruction to replace the screen.

The backlight can be removed easily to build for 3D printer or for video projector and  DIY projector !

If you hope this screen work at 60hz, your pc need to support 2k 60hz,and pleas use 2.0 HDMI Cable, 
and we need write 60Hz board for you, so please leave message to us.

Note for buyer:

1:  in stock now !!!

2:If you need to remove the backlight, please let us know

3:  1 Screen + Driver Board +  Flex Cable

4:  Please contact us for full datasheet and technical support 

5:if you purchase only 1pcs lcd, make sure your driver board program matches our screen, otherwise the screen will not light.

 

Module Dimensions

70.94(W)mm*128.26(H)mm*1.35(t)mm(Excluding I/F -FPC and electronic components)

Active Area Dimensions

68.04(W)mm*120.96(H)mm(5.46”)

Pixel Pitch

0.04725(W)mm*0.04725(H)mm(538ppi)

Resolution

1440*2560

Color Pixel Arrangement

RGB Vertical Stripe

Display Mode

Transmissive Type,Normally Black Mode,In-Plane Switching Mode

Number of Colors

16,777,216 Colors

Backlight

Light Emitting Diode(LED),14LEDs are 2 parallel,7 series connection

Backlight current:20mA/LED(typ)

Power Supply Voltage

AVDD=5.5+/-0.1V AVEE=-5.5+/-0.1 V

Interface I/O Power supply

Note(1)

VDDI=1.8=/-0.1V

The same voltage as “H” level of a customer’s interface signal must be supplied to VVDI

LCD Driver IC

(Source and Power IC: Renesas SP Driver Inc.)

Interface

MIPI_DSI Video mode(4-Lan x2-port)

Method of Inversion

Column Inversion

Surface Treatment

HC-Polarizer(Hardness:3H)

 
 
 
IMG_2363IMG_2364IMG_2365
 
IMG_2367IMG_2370IMG_2368IMG_2369
45678

 

-5_01-5_02-5_03-5_04-5_05-5_06